|
|
We are engaged in offering a wide range of Insulation Material on the demand of our clients. Our wide range of product is manufactured as per the international quality standards and is provided to our clients in customized specifications. Our Insulation Material are manufactured using high quality raw material.
|
|
|
Ceramic Wool BlanketCeramic Wool Blanket is a refractory fiber needled mat made without binder ceramic fibre the only super- spun double needled fibre in the country today. Ceramic Blanket RTZ and HTZ are zirconia established and are suitable for use upto 1260° C and 1425° C respectively both blankets have excellent resistance to most chemicals if wet by oil and water, their thermal and physical properties are fully restored upon drying. | Density | 64,96 and 128 kg/m3 | | Dimensions | 7.62x0.61m=4.648m2 | Application: Annealing furnaces and glass kilns, glass furnace crown insulation, kilns, kiln cars for Ceramic Industries, HRSG and stack Linings, high temp. tubes/ filter media/gaskets etc.
|
|
|
|
|
|
|
|
|
Rockwool Lightly Resin Bonded MattressRockwool Lightly Resin Bonded Mattress have controlled thickness and density to provide excellent stability and predictable heat losses. Mattresses are laminated with galvanized iron or stainless steel hexagonal wire mesh on one or both sides and are stitched with galvanized iron or stainless steel wire. | Density | 100, 120 & 150 kg/m3 | | Temperature | 750° C | | Dimensions | 1.22 m x 1.52 m 1.22 m x 1.64 m 25 mm- 100 mm thick | ApplicationBoiler, Equipment, Vessel, Tanks, Chimney, E.S.P, Heat Exchanger etc. Rigid Pipe SectionMandrel wound and concentrically formed from filling pipe section, precisely made to fit standards pipe diameters offer uniforms maximum resistance to passage of heat along and around the entire 360° of the pipe axis. Superior density of these products enhances compression resistance in service. These sections are easy to fit and hence afford speedy application at site. | Density | 144 kg/m3 | | Temperature | 750° C | | Size | 1.25 mt (L), 25, 40, 50, 60 65, 75 mm thick ½ “ NB- 14 “ NB | ApplicationSteam & process piping, air conditioning, systems, round ducts etc.
|
|
|
|
|
|
|
|
|
Bonded Fiberglass WoolWe manufacture Bonded Fiberglass Wool using bonded glass fibers. Our product is Known for it’s thermal and acoustic insulation and is available in the markets with or without Al.Foil. Some of the application areas of our product are: - Under deck Insulation
- Over the false ceiling
- For Ducting
The specifications of our product are: - Size : Rolls in standard width of 1.2 m
- Density :16, 24, 32, and 48 Kg/m3
- Thickness :12, 25, 40, 50 mm
|
|
|
|
|
|
|
|
|
Lightly Resin Bonded Rockwool MattressesWe offer a wide range of Lightly Resin Bonded Rock wool Mattresses, which can be customized as per the client’s specifications. These are manufactured using bonded rock fibers with wire mesh machine stitched and machine laid on one side and are used in: - Boiler
- Equipment vessel tank
- Chimney
- ESP
- Pipe & fitting duct
The specifications of our product: - Operating Temp: Up to 700 C
- Sizes Mattresses in the size of 1.22 mX1.52 m with wire mesh machine
- Density: 100 , 120, & 150 Kg/m3
- Thickness: 25, 40, 50, 65, 75 & 100 mm
|
|
|
|
|
|
|
|
|
Thermal And Acoustic MaterialsWe offer a wide range of Thermal and Acoustic Materials, which can be customized as per the client's specifications. These are technically advanced to use in the noise control industry. Our range of these products is manufactured using superior quality raw material and is available in the markets at competent prices.
|
|
|
|
|
|
|
|
|
Bonded Rockwool SlabsWe manufacture a wide range of Bonded Rockwool Slabs using bonded rock fibers, which can be customized as per the client’s specifications. These are available in the markets with facing of aluminum foil, glass cloth etc The application areas of our product are: - Under deck insulation
- Acoustic insulation
- Duck insulation
- Insulation over false ceiling transport appliances, partition
- Industrial insulation
The specifications of our product - Operating Temp : Up to 700 C
- Sizes: Slabs in the size of 1mtr X 0.6mtr with and without Al. foil
- Density: 48, 64, 96, & 144 Kg/m3
- Thickness: 25, 40, 50, 65, 75 & 100 mm
|
|
|
|
|
|
|
|
|
Thermal Insulating FoamWe manufacture a broad and effective range of which are known for their lightweight and high performance all around the world. These are the thermal insulating foam, which can be bonded to rigid or flexible substrates. According to the diverse requirements of our clients, we also customize our product. Apart from that we our range is available in the markets in competitive prices. |
|
|
|
|
|
|
|
|
Phenolic Foam ( Phenotherm Sheet )Item Code: 09 Phenolic Foam ( Phenotherm Sheet ) is a lightweight, high performance, thermal insulating foam that possesses excellent mechanical strengths. Phenolic foam has a closed cell structure that resists water ingression. Phenolic foam is available in block, slab, pipe sections, foil covered laminates, and specialty sections. Phenolic foam can be bonded to rigid or flexible substrates to produce special panels for specific applications. Thick : 25mm.30mm,40mm,50mm.thick ( KP/KP & KP/AL ) | 1 | Blocks form | Any specified size | | 2. | Slabs Size Thickness | 1) 1220 x 610 mm 2) 1195 x 595 mm 3) 1000 x 500 mm Any specified thickness | | | Facings | Kraft paper, Aluminum foil, Decorative paper And Gloss cloth. | | 3. | Pipe Sections: | | | Size | Nominal Bore 0.25 inch to 20 inch | | | Thickness(mm) | 25,30,40,50,60,75 & 100mm | | | Facings | Bare, Aluminum foil and Gloss cloth . |
Application Areas: Pipe and Duct Insulation Under-deck and over-deck(roof) insulation Suspended ceilings and partitioning for Commercial Complexes, residential buildings and hospitals.. Insulation of vessels, pipelines in petrochemical, fertilizer, chemical and pharmaceutical plants and in refineries. Insulation of cold storage and refrigerated rooms. Insulation of high – altitude huts. Insulation of refrigerated rail, surface and marine containers. Life-saving equipment such as life jackets, buoyancy block and other marine equipment. Other Information - Pay Mode Terms:
Other - Minimum Order Quantity:
500 Meter - Port of Dispatch:
7 days - Delivery Time:
IMMEIDATE - Packaging Details:
SHEET FOAM ( BOX )
|
|
|
|
|
|
|
|
|
Rockwool Resin Bonded SlabsRock wool Resin Bonded Slabs are used in both hot and cold insulation. It is mainly used for insulation of flat and covered surfaces and is high noise reduction coefficient. Its surface can be laminated with aluminum foil etc. | Density | 48, 64, 96, 144 kg/m3 | | Temperature | 750° C | | Conforms to | IS- 8183 spec. | | Dimensions | 0.6m W X 1 m L 0.5m W X 1 m L 25mm – 100 mm Thick | Application Under deck Insulation, Acoustic Insulation, Tanks, Large vessels, Boiler, Ovens over false ceiling & wall partitions etc. |
|
|
|
|
|
|
|
|
Resin Bonded Fiber Glass WoolFiber glass is highly efficient, resistant and easy to handle flexible blanket insulation composed of fire, stable and uniformly textured inorganic glass fiber bonded together by a non water soluble and fire retardant thermo setting resin it is free from coarse fibers and shot due to its mineral composition. Our Resin Bonded Fiber Glass Wool includes following specification : Availability -
Roll -
Slabs -
Boards -
Aluminum Foil Faced | Density | 16–48 kg/m3, conforms to IS 8183 | | Temperature | 195° C to +230° C | Application Fiber Glass Wool is intended for in use in commercial institutions, industrial, agricultural, residential, construction as thermal acoustical insulation for interior exterior and cavity wall applications participations poultry farms, ceilings as back loading of existing ceiling systems. |
|
|
|
|
|
|
|
|
Corrosion Protection Bituminous TapeThe specially formulated corrosion protection bituminous tape/corrosion resistant bitumen compound provides high softening point, high penetration and high resistance to ageing. The tape comprises of high tensile strength thermofusible hm hdpe film on both the sides.
Uses:
Pipe wrap-bt is designed for application on buried and immersed pipes, fittings and appurtenances to protect them from high corrosive environment. For application on steel substrates and steel fittings, a coat of shalitex primer (fd) is required.
Application: Pipelines when treated in the correct way with shalitex primer (fd) and wrapped with pipewrap-bt remain corrosion free for at least 25 years. The pipe surface should be cleaned thoroughly either with wire brush or should be sand blasted. On the cleaned surface shalitex primer (fd) is applied at 90 ml/sqm to get dft of 30 microns. The surface should be allowed to touch dry (30 minutes at least). For application on weld joints, necessary welding and testing of the joint should first be completed. The remaining procedure remains the same as that of pipe. Overlap of 50mm should be there on each side of the weld joint. Pipewrap-bt is recommended to be applied at the time of pipe erection and lowering inside the trenches to avoid any damage. While in storage, pipe wrap-bt roll must be stacked properly undercover. Health and Safety:
Pipe wrap-bt is non hazardous in normal conditions of use. Please refer to health and safety data sheets available on request. |
|
|
|
|
|
|
|
|
Crosslinked Polyethylene SheetItem Code: 9 Under Crosslinked Polyethylene Sheet we provide:
"PARAMOUNT" FR XPE Crosslinked Closed Cell Fire Retardant Polyethylene Insulation | Technical Data | Test Standard | | Paramount FR XPE | | Density | JIS K 6767 | Kg/m3 | 28+4 | | Colour | | | Light Grey/Customized shades | | Thermal Conductivity 0 oC 23 oC 46 oC | IS : 3346/1980 IS : 3346/1980 IS : 3346/1980 | K cal/hr.m oC | 0.027 0.029 0.033 | | Temperature Range | Using Climate Chamber | oC | -40 to + 115 | | Oxygen Index | ASTM D 2863 | % | 27.7 | | FIRE BEHAVIOUR Flammability Smoke Density Dropping | DIN-5510(Pt-2)-54837 DIN-5510(Pt-2)-54837 DIN-5510(Pt-2)-54837 | | Fire retardant Class SR2 Passed | | Surface Spread of Flame | BS : 476 Part 7 | | Class I | | Fire Propagation Index (XPE laminated with Reinforced Al. foil) | BS : 476 Part 6 | | Class 0 (Total Index I=4.7 & sub index I,=2.15 against max. prescribed limits of 12 & 6 respectively) | | Water Vapour Permability (with or without foil) | DIN EN ISO : 12572 | | Negligible | | Water Vapour Resistance Factor (u) Plain XPE without AI. Foil XPE with AI. Foil on one side | DIN EN ISO : 12572 | | 12805 17310 | Other Information - Packaging Details:
FR-XPE CHEMICALLY CROSSLINKED CLOSEDCELL FIRE RETARDANT POLYETHYLENE INSULATION
|
|
|
|
|
|
|
| |
